3FVAPE New 2018.01.08

Mod


Original Aspire Cygnet 80W VW Variable Wattage Box Mod $35.00
The Original Aspire Cygnet mod is a versatile device that supports three modes, Variable Wattage (1~80W), Variable Voltage (0.5~8V), and Bypass. The Cygnet will fire at resistances between 0.1 and 3.5ohms. It is powered by a single high amp 18650 battery (not included). Coming with 0.86 inch OLED screen, it is easy to read vaping informations. There is a micro USB port for convenient charging.This item also has many color to choose.


Original Steel Vape Sanctuary Mechanical Box Mod $39.99
The product images and information are provided by the manufacturer, for reference only. The final refers to the manufacturer's actual product.The Original Steel Vape Sanctuary Box Mod is an unregulated device with Mosfet chip to make it safe when vaping. It is powered by dual 18650 batteries (not included) in parallel. The mod supports resistance at between 0.1 and 3ohms. The 510 connetor is spring loaded and there is no overhang with even 26mm atomizer.This item also has many color to choose.


Atomizer


Original Steel Vape Tailspin RDTA Rebuildable Dripping Tank Atomizer $22.99
The Steel Vape Tailspin RDTA is a 25mm atomizer which can be used as either RDA or RTA. The deck features dual post design with two post holes at each post, side filling port for easy refilling, 6mm deep juice well, AFC drip tip cap to adjust side airflow. Resin and POM drip tip are included.This item also has many color to choose.


Apocalypse Mechlyfe RDTA Rebuildable Dripping Tank Atomizer Clone $10.99
The Apocalypse Mechlyfe RDTA Clone is constructed from stainless steel in 24mm diameter, coming with 3.5ml juice capacity. It features a large build deck for easy coil building, with dual post design and oversized bridge clamp. The RDTA also features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. 810 wide bore resin drip tip included.This item also has many color to choose.


Original Vapefly Mesh Plus RDTA Rebuildable Dripping Tank Atomizer Original Price $35.50,Now Only $22.99
The Original Vapefly Mesh Plus RDTA features stainless steel construction, 25mm diameter, 3.5ml e-juice capacity, easy side filling, and postless build deck for mesh wire, single coil or dual coil builds. There are 4 terminals with quad individual clamp, which make coil building much easier. The precise airflow system offers great flavor and eliminates leakage. 810 Delrin drip tip is included.This item also has many color to choose.
This RDTA is Standard Edition with 3.5ml capacity.


Mod Kit


Original Steel Vape Tailspin Hybrid Mechanical Mod + RDTA Kit $35.99
The product images and information are provided by the manufacturer, for reference only. The final refers to the manufacturer's actual product.The authentic Steel Vape Tailspin Kit consists of Tailspin Mod and Tailspin RDTA.This item also has many color to choose.
Mod:
The Steel Vape Tailspin Mod is a high quality mech mod that features replaceable aluminum and resin sleeve, hidden fire button with spring design, copper battery contact and can support 0.05ohm minimum atomizer resistance. It is powered by single 18650 battery (not included).
RDTA:
The Steel Vape Tailspin RDTA is a 25mm atomizer which can be used as either RDA or RTA. The deck features dual post design with two post holes at each post, side filling port for easy refilling, 6mm deep juice well, AFC drip tip cap to adjust side airflow. Resin and POM drip tip are included.


Vaping Accessory


LK Ni80 Pre-built Coil Heating Wire for RDA / RTA / RDTA $3.59
The LK Coils is made from Nichrome 80 wires and features 0.18 ohm (single). This pre-coiled heating wire comes with 26GA x 4 / 38 coils. This heating wire will be a good vaping choice for DIY.This item also has many rated parameter versions to choose.
This product comes with 8 PCS in 1 pack.


Display Base Stand for 15mm Tube Mod $2.99
This display base stand is made out of aluminum. It is suitable for 15mm diameter tube mod.This item also has many color to choose.
The top diameter is 22mm, inner diameter is 15mm.


810 Replacement Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $2.99
The 810 drip tip is made from resin with 14mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.This item also has many color to choose.
This drip tip will be shipped by random color (one piece). More options than what's on the image.


810 Anti-Spit Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $2.99
The 810 drip tip is made from resin with 12mm height. The honeycomb design at the base can prevent e-juice spit back. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.This item also has many color to choose.

Post a comment

Private comment

Profile

fc2user25989a

Author:fc2user25989a
Welcome to FC2!

Latest journals
Latest comments
Monthly archive
Category
Search form
Display RSS link.
Link
Friend request form

Want to be friends with this user.